Cantilever Racks
Cantilever Rack: The technically simple sophisticated design of cantilever racking / shelving cantilever allows adjustment of the cantilever arms for individual adjustment to specific needs. Inquiry for cantilever!
The secret of sipag: The connector pin technology!
1. Takes you safety:
Wedging is aware within the specially hardened pins.
Production pressure run is vertical.
2. It brings life:
The pressure is distributed to up to 60% greater contact area than other well-known in the market wedging systems. Thus, the hole is much less stressed.
Cantilever
The application demonstrates the success:
- SIPAG cantilever storage systems are adapted to all needs
- Construction of systems for each type stored goods and loads.
- One-sided shelves can be subsequently converted to double-sided.
- Each system is built with a safety factor of at least 1.5, and thus over-sized safe.
- The deflection of the cantilevers under full load is limited to 1 / 200 of the cantilever arm.
- Slightly tapered column design, thereby compensating the deflection at one-sided
Cantilever for metall sheet plates and pallets
With a cantilever, you can keep any kind of stored goods, pallets and loads. The cantilever racks are known for their accessibility to each item or unit and this without any rearrangement time period. The units are stored, one stacked on each other in the shelf. In a cantilever a versatility is given. The production of cantilever is made for the individual needs and burdens. Arms can be in a grid of 76 mm easily changed in height. The shelf system can be adapted to all requirements and assembled. The shelf and the cantilever arms are directed in their endurance on the size, weight and length to the stored goods you use.
With such a storage rack your productivity is increased.
Cantilever Roof 2
Of course, even the “interaction” between lift truck and shelf work. At the height of pillars, each degree is offered in the grid of 76 mm. The capacities of the individual columns to go into areas of 20,000 kg per page.
For the poor the projection of 100 mm to over 2500 mm, with load capacities from 50 kg to more than 2,000 available for each arm. For a precise combination of ability, you can sign your non-binding
Whether the cantilever is to be in the hall or outdoors, with or without a roof, with or without back, no problem for us. In the design of the shelves in the open wind loads and snow loads according to area classes and the structural requirements to be considered.
Cantilever for chipboard eggerplate
If cantilever are outdoors, they will be delivered only in zinc galvanized.
If the stored goods or pallets with special arm beams to be stored. Can we bring in by cross beams, gratings or load bridges between the arms allow for easy storage.
During assembly all the shelves are aligned with laser in flight, and side and anchored to the ground. (No fixed wall mounting)
In a cantilever a versatility is given. The cantilever is preparing for the individual needs and pressures.
Cantilever for sawn timber
Arms can be in a grid of 76 mm easily changed in height. The shelf system can be adapted to all requirements and assembled. The shelf and the cantilever arms are directed in their endurance on the size, weight and length to the stored goods you use. With such a storage rack your productivity is increased. As for our cantilever is that you NOT purchase goods from the shelf “. Our shelves are designed exactly to your stored goods. The viability of the arms, the sustainability of support that projection, the column height and of course the column spacing can be exactly matched the stored material. Inquiry for cantilever!
Whether the shelf is to be in the hall or outdoors, with or without a roof, with or without
Cantilever for doors and frames
Back board or a roof, no problem for us. In the design of the cantilever in the open wind loads and snow loads according to area classes and the structural requirements to be considered. If shelves are outdoors, they will be delivered only in galvanized finish. If the stored goods or pallets with special bases to be stored. Can we bring in by cross beams, gratings or load bridges between the arms allow for storage. Of course, even the “interaction” between truck and shelf work. At the height of pillars, each degree is offered in the grid of 76 mm. The capacities of the individual columns to go into areas of 20,000 kg per page. Inquiry for cantilever!